Kubota Industrial Engine Elite Dealer

Kubota Industrial Engine Parts & Service

OEM parts in stock. Factory-certified service, repair, and rebuild. 300+ hours of Kubota factory training behind every job.

Kubota Engines & Parts Authorized Dealer

Recognized by Kubota

Sole U.S. Recipient — Kubota’s 2025 Customer Experience Excellence Award

In 2025 Kubota named Alpine Equipment the only American dealer to earn its Customer Experience Excellence Award. It recognizes a standard of customer care, parts support, and service quality that no other U.S. Kubota engine dealer matched that year.

For engine owners and OEMs, that is manufacturer-backed proof — not a self-assessment.

1 Sole U.S. recipient, 2025 Excellence Award
300+ Hours of factory-certified training
48 hrs Typical rebuild quote turnaround
U.S. Elite-Tier
Industrial Engine Service & Parts Center
300+ hrs
Factory-Certified Kubota Technician Training
5,400+
Kubota Engine Part Numbers — Stocked or OEM-Sourced, Shipped Nationwide
In-House
Dyno, Diagnostics, and Full Engine Rebuilds

What We Do for Kubota Industrial Engines

Service, parts, and repair for Kubota industrial engines — the powerplants behind gensets, RTVs, light towers, water pumps, and industrial power units.

Genuine Kubota Parts

Filters, gaskets, sensors, injectors, water pumps, radiators, ignition components, pony motor parts, and the long-tail OEM parts most dealers don't stock. In-shop pickup in Utah County and nationwide shipping for everything else.

Engine Service & Diagnostics

Factory-trained technicians, factory-spec diagnostics, factory-spec procedures. Whether it's a no-start, a power-loss complaint, a regen problem, or an oil-pressure fault, you get a real answer the first time — not parts-darts.

Repair & Full Rebuilds

From head gasket jobs to complete in-frame and out-of-frame rebuilds. We document the work, use OEM parts, and stand behind every engine that leaves our shop. Most rebuilds are quoted within 48 hours of teardown.

Kubota Industrial Engines We Service

Diesel and gasoline industrial engines across the major Kubota series. Every model below links to its full parts catalog. If your engine isn't listed, call us — we cover the full Kubota industrial lineup.

Z Series Diesel, 2-cylinder

Sub-compact gensets, refrigeration units, marine accessory power

WG Series Gasoline / LP / natural gas

Standby and prime generators, forklifts, irrigation pumps, mobile light towers

DF Series Dual-fuel (gasoline / LP)

RTV pony motors, utility vehicles, compact stationary power units

DG Series Natural gas / LP

F Series Diesel, 5-cylinder

EA Series Diesel, single-cylinder

RK Series Diesel, single-cylinder

Don't see your engine? Call (801) 701-7394 with the model and serial number — we'll tell you on the phone whether we can help.

Kubota Parts We Keep On the Shelf

High-moving wear items, common-failure parts, and the OEM components most aftermarket suppliers don't carry. Need a part number? Text or call the part — we'll find it.

Filters & Fluids

Oil, fuel, air, and hydraulic filters across the D, V, WG, and DF series. Genuine Kubota service fluids and coolant.

Radiators & Cooling

OEM radiators, water pumps, thermostats, hoses, and cooling-fan assemblies. We repair and source full radiator replacements.

Ignition & Sensors

Ignition coils, glow plugs, glow controllers, crank-position sensors, cam sensors, oil-pressure switches.

Pony Motor Parts

The hard-to-find DF750/DF752 pony motor parts — coils, carbs, valve covers, recoil starters, fuel pumps.

Fuel System

Injectors, injection pumps, fuel-shut-off solenoids, fuel-lift pumps, and full common-rail components for CR-series engines.

Gaskets & Seals

Head gaskets, valve-cover gaskets, oil-pan gaskets, crank seals, and complete overhaul gasket kits.

Engine Internals

Pistons, rings, rod and main bearings, crank kits, head and short blocks for full rebuilds.

Generator Parts

Voltage regulators, AVRs, brushes, capacitors, control boards for GL- and GR-series Kubota gensets.

Call (801) 701-7394 for a Parts Quote

Shop Kubota Parts by Engine System

Don't know the part number? Start with the symptom. Each system page lists every part we stock for that system, across all Kubota engine models.

Looking for parts for one specific engine? Every engine page above filters down by system too.

Shop Kubota Generator Parts

Parts for Kubota GL-series diesel gensets — control panels, generator-end and alternator components, plus everything the powering engine needs. Every generator page links straight through to its engine.

Running a GR-, GH-, or another Kubota genset we haven't listed? Call us — we stock parts well beyond the models shown here.

Why Equipment Owners Choose Alpine for Kubota

  • Elite-Tier Dealer Status
    Alpine is one of a very small group of U.S. service centers operating at Kubota's highest industrial-engine tier — the certification that requires factory training, parts depth, and shop standards above the standard dealer level.
  • 300+ Hours of Factory Training
    Our Kubota technicians have completed 300+ hours of factory-led training across the D, V, WG, DF, and OC series. Real diagnostic procedures, not guesswork.
  • OEM Parts In Stock
    We carry the high-failure items most contractors call us for after their first aftermarket part doesn't fit or doesn't last. If it's not on the shelf, OEM-channel sourcing is usually faster than what local parts counters can pull.
  • Nationwide Parts Shipping
    Our parts customers aren't only in Utah. We ship Kubota OEM parts across the country — including the hard-to-find pony motor and long-tail components.
  • Local Pickup in Utah County
    Walk in to our American Fork shop and pick parts up the same day. Bring your engine in for service. We run a full repair shop, not a parts counter.
  • Real Humans on the Phone
    Call us with a part number, an engine model, or just a symptom. You'll talk to someone who can actually diagnose, not route you to a queue.
Alpine technician servicing a Kubota industrial engine at the American Fork shop

Elite Dealer vs. Standard: Why the Tier Matters

Kubota’s Industrial Engine Elite Dealer tier sits above the standard Premier service-dealer certification. This is what the difference buys you.

Capability Elite Dealer (Alpine) Standard / Premier
Factory-led technician training 300+ hours Baseline
Factory diagnostic tooling (KOBD ACE) Yes Limited
OEM parts depth — high-failure items stocked Deep, on-hand Order as needed
Documented shop procedures & service volume Elite-qualified Standard

Shop rate $145/hour · field service $165/hour (two-hour minimum). Most rebuilds quoted within 48 hours of teardown.

What Our Customers Say

★★★★★

I have use Alpine several times and every time it has been a great experience. They are very service oriented and willing to go the extra mile to make sure they are taking care of me.

Von Dotson

★★★★★

Absolutely amazing experience with Alpine Rentals in American Fork! The staff was super friendly, helpful, and made the whole process quick and easy. Everything was clean, well-maintained, and exactly what we needed. You can tell they really care about their customers. Highly recommend

Chris Williams

★★★★★

Been having my forklifts serviced and looked out for a while here service has been good, they will look everywhere to get you the best quote they can on parts that need replacing, have kept my machines up and running.

Bayro Espinoza

Kubota Parts & Engine Service FAQs

Is Alpine Equipment a Kubota dealer?
Yes — Alpine Equipment is an Elite-tier Kubota Industrial Engine dealer for service and parts. We are not a Kubota tractor or machine dealer; we specialize in the industrial engines that power gensets, RTVs, light towers, pumps, and industrial equipment. For new Kubota machine sales, contact your local Kubota tractor dealer.
Does Alpine sell new Kubota tractors or RTVs?
No. Alpine is an authorized Kubota Industrial Engine service and parts center. New Kubota tractors, RTVs, and machine sales are handled by Kubota's machine-dealer network — we focus on engine service, repair, and OEM parts. If you own a Kubota machine and need parts or service for the engine inside it, call us at (801) 701-7394.
What Kubota engines do you service?
We service the full Kubota industrial engine lineup — D Series (D722, D902, D1105, D1305, D1703, D1803, D1803-CR), V Series (V1505, V2403, V2607, V3307, V3800), WG Series (WG752, WG972, WG1605, WG2503, WG3800), DF Series (DF750, DF752, DF972), OC Series (OC60, OC95), and Z Series (Z482, Z602). If your engine isn't listed, call us with the model and serial — we likely still cover it.
Can you ship Kubota parts nationwide?
Yes. Most OEM Kubota parts ship same-day or next-business-day from our American Fork shop. Call (801) 701-7394 or fill out a parts quote request with your engine model and the part you need. We confirm availability and quote shipping in the same call.
Do you carry OEM Kubota parts, or aftermarket?
OEM Kubota parts are our default — that's what our dealer authorization is built on. We can quote aftermarket options when it makes sense for the application, but we'll tell you up front where OEM is the right call (most pony motor parts, common-rail components, electronic sensors, and emissions-related parts).
How quickly can I get a hard-to-find Kubota part?
Most high-volume service parts are in stock and pick up or ship same day. Less-common items typically arrive within 2–5 business days through Kubota's parts channel. The fastest path is always to call with your engine model and serial number so we can confirm fitment before you order.
Do you rebuild Kubota industrial engines?
Yes. We perform in-frame and out-of-frame rebuilds across the D, V, WG, DF, and OC series — head gasket jobs, top-end overhauls, full overhauls, and short/long-block replacements. Rebuilds are documented, use OEM parts, and we typically quote within 48 hours of teardown.
Are your technicians Kubota-certified?
Yes. Our technicians have completed 300+ hours of Kubota factory-led training across the industrial engine lineup. Elite-tier dealer status requires this depth of certification — it's a meaningful tier above the standard service-dealer requirement.
Where are you located, and do you offer field service?
Our shop is at 349 S 100 W, American Fork, UT 84003 — serving Salt Lake and Utah County for in-shop and field engine service. For nationwide customers, we focus on parts shipping and remote diagnostic support by phone. Field service rate is $165/hour, two-hour minimum.

Talk to a Kubota Engine Tech Today

Have an engine model, a part number, or just a symptom? Call and you'll reach someone who can actually diagnose it — not a queue.